Suche - GMN

Search / Request - Standard bearing

Standard bearing

Special bearings

Bearing systems

Direct search

GMN item number / name

No hits!Please input search term!

Search parameters

Spindle ball bearings Groove ball bearings

Spindle bear (can not be dismantled)
Type S (standard)
Type SM (high speed)
Type KH (maximum speed)

Optimized for maximum speed
Employment against a second warehouse is required
High stiffness and resilience in the radial and axial direction

Deep groove ball bearing
Type 60.. and
Type 62.. according to DIN 625

Universally applicable
Absorption of axial and radial forces in both directions

Drilled hole d [mm]

Outer diameter D [mm]

Width W [mm]

Speed n [min^-1]

Speed range adapted to: Steel balls, oil lubrication

Speed range adapted to: Steel balls, grease lubrication

Speed range adapted to: Ceramic balls, oil lubrication

Speed range adapted to: Ceramic balls, grease lubrication

, Cage T9H

, Cage J

Note: No standard ball bearings could be found for the input parameters. You can of course place a query to produce a special bearing. Please fill out the form as much as possible before you change to the special bearing query (right, below).

You can enter the values for your searched product here.
You have two possibilities:

From the GMN default value
Enter the individual value into the field provided

The standard values are dependent. Values which are not available for the entered combination are presented in the informational list in parentheses.

The available minimum or maximum standard values can be obtained by clicking on the symbols:

The index before the input fields quantifies the possible combinations.

Spindle ball bearings

With bore diameter d = 5 to 120 mm
GMN standard series 18 .., 19 .., 10 .., 02 .. (According to DIN 616 and ISO 15)

Deep groove ball bearing

With bore diameter d = 5 to 40 mm
GMN standard series 60 ../ 62 .. (as per DIN 616 and ISO 15)

P4/ABEC7 weitere auf Anfrage P4+ nach GMN UP+ nach GMN

Tolerance classes P4 and P2 according to DIN 620 and ISO 492 as well as HG and UP according to GMN factory standard.

Steel Ceramics (hybrid ball bearing)

Möglicher Drehzahlbereich in den Leistungskennzahlen wurde automatisch verkleinert. Bitte Einstellungen prüfen.

Possible Speed range in the performance characteristics were automatically increased.

Steel
Material: Rolling bearing steel (chrome steel) 100 Cr 6

Ceramic (hybrid ball bearing)
Material: Silicon nitride Si3N4

All designs and sizes are available as hybrid ball bearings
The use of ceramic balls generally leads to higher rotational speed limits and bearing stiffnesses

Hard mesh, solid cage, outboard (TA cage) Polyether ether ketone, solid cage, outboard (TXM cage)

Steel sheet (Cage J) Polyamide, crown cage, ball-installation (T9H cage)

Spindle bearings
TA cage (standard for all GMN spindle bearings)

Operating temperature: 120 °C
Use universal
for grease and oil lubrication

TXM cage

Available for Sizes of the types S, SM, KH
Operating temperature: 250 °C
For grease and oil lubrication; optimized for grease lubrication

Deep groove ball bearing
T9H cage (GMN standard)

Operating temperature: 140 °C

J-cage

Operating temperature 220 °C

Note: The maximum speed is lower with grease lubrication. Please examine the set range with dimensional and performance key figures.

Max. speed range in the dimensional and performance characteristics were adjusted.

Bearings without grease are supplied with standard preservation

Grease-lubrication

All GMN high-precision ball bearings are greased.
Standard greasing for deep groove ball bearings: CLEAR ASONIC GLY 32
Standard greasing for deep groove ball bearings: KLÜBER ASONIC GLY 32
Other greases are available upon request.

Oil direct lubrication (spindle ball bearings)

GMN Special versions for oil direct lubrication
Execution: + A, + AB, + L, + LB

Grease relubrication (spindle ball bearing)

Systems for grease relubrication are used when grease useful life andandor RPM suitability of the permanent grease lubrication are no longer sufficient.
Execution: +AG

Search results - Standard bearing

	Description (Item no.)	Main dimensions	Bore diameter d [mm]	Outer diameter OD [mm]	Width of the individual bearing W [mm]	Balls	Pitch circle diameter d_m [mm]	Ball diameter D_w [mm]	Number of balls Z [Units]	Dimensions	Outer diameter Inner ring d₁ [mm]	Outer diameter Inner ring (Open side) d₂ [mm]	Inner diameter Outer ring D₁ [mm]	Outer diameter Inner ring (Open side) D₂ [mm]	Edge distance r_1,2 [mm]	Edge distance (Open side) r_3,4 [mm]	Mating dimensions	Edge radius Conversion part r_{a max} [mm]	Edge radius Conversion part (Open side) r_{b max} [mm]	Inner ring outside diameter d_{a,b min} [mm]	Outer ring Connection diameter D_{a,b max} [mm]	Durchmesser Öleinspritzung für TA- Käfig d_T [mm]	Bearing weight m [kg]	Contact angle αO [°]	Load capacity	Dynamic load capacity C [N]	Static load capacity C₀ [N]	Speed value	Max. speed n [1/min]	Pre-tension / axial clearance L	Pre-tension F_v [N]	Axial clearance (pair of bearings) slight pre-tension C_ax [N/μm]	Pre-tension / axial clearance M	Pre-tension F_v [N]	Axial clearance (pair of bearings) slight pre-tension C_ax [N/μm]	Pre-tension / axial clearance S	Pre-tension F_v [N]	Axial clearance (pair of bearings) slight pre-tension [N/μm]	Spring pre-tension F_f [N]	Downloads [.pdf,.dxf]

Send parameters - standard bearings

Your first name

Your last name

Your email address

* E-mail address receiver

The field is required.

Subject

Personal remarks

* Input required.

Comparison - standard bearings

Description

Main dimensions

Bore diameter

d

[mm]

Outer diameter

D

[mm]

Width of the individual bearing

B

[mm]

Balls

Pitch circle diameter

d_m

[mm]

Ball diameter

D_w

[mm]

Number of balls

Z

[Units]

Dimensions

Outer diameter
Inner ring

d₁

[mm]

Outer diameter
Inner ring
(Open side)

d₂

[mm]

Inner diameter
Outer ring

D₁

[mm]

Outer diameter
Inner ring
(Open side)

D₂

[mm]

Edge distance

r_1,2

[mm]

Edge distance
(Open side)

r_3,4

[mm]

Mating dimensions

Edge radius
Conversion part

r_{a max}

[mm]

Edge radius
Conversion part
(Open side)

r_{b max}

[mm]

Inner ring
outside diameter

d_{a,b min}

[mm]

Outer ring
Connection diameter

D_{a,b max}

[mm]

Durchmesser
Öleinspritzung
für TA- Käfig

d_T

[mm]

Bearing weight

[kg]

Contact angle

αO

[°]

Load capacity

Dynamic
load capacity

C

[N]

Static
load capacity

C₀

[N]

Speed value

Max. speed

n

[1/min]

Pre-tension
axial clearance L

Pre-tension

F_v

[N]

Axial clearance
(pair of bearings)
slight pre-tension

C_ax

[N/μm]

Pre-tension
axial clearance M

Pre-tension

F_v

[N]

Axial clearance
(pair of bearings)
slight pre-tension

C_ax

[N/μm]

Pre-tension
axial clearance S

Pre-tension

F_v

[N]

Axial clearance
(pair of bearings)
slight pre-tension

C_ax

[N/μm]

Spring pre-tension

F_f

[N]

Downloads

[.pdf,.dxf]

Summary - Standard bearing (2/2)

Request - Special bearing (1/3)

Standard bearing

Special bearings

Bearing systems

Spindle ball bearings Groove ball bearings

Spindle bear (can not be dismantled)
Type S (standard)
Type SM (high speed)
Type KH (maximum speed)

Optimized for maximum speed
Employment against a second warehouse is required
High stiffness and resilience in the radial and axial direction

Deep groove ball bearing
Type 60.. and
Type 62.. according to DIN 625

Universally applicable
Absorption of axial and radial forces in both directions

Drilled hole [mm]

Outer diameter [mm]

Width of the individual bearing [mm]

Rotating inner ring [min^-1]

Rotating outer ring [min^-1]

Starting angle [°]

You can enter the values for your searched product here.
You have two possibilities:

From the GMN default value
Enter the individual value into the field provided

The standard values are dependent. Values which are not available for the entered combination are presented in the informational list in parentheses.

The available minimum or maximum standard values can be obtained by clicking on the symbols:

The index before the input fields quantifies the possible combinations.

Spindle ball bearings

With bore diameter d = 5 to 120 mm
GMN standard series 18 .., 19 .., 10 .., 02 .. (According to DIN 616 and ISO 15)

Deep groove ball bearing

With bore diameter d = 5 to 40 mm
GMN standard series 60 ../ 62 .. (as per DIN 616 and ISO 15)

P4/ABEC7

P2/ABEC9

P4+

UP+

Tolerance classes P4 and P2 according to DIN 620 and ISO 492 as well as HG and UP according to GMN factory standard.

Expected lifetime [h]

Load

Radial [N]

Axial [N]

Temperature

Outer ring [°C]

Inner ring [°C]

Summary - Special bearing (3/3)

Request - Bearing systems (1/3)

Standard bearing

Special bearings

Bearing systems

Bearing

Bore diameter [mm]

Outer diameter [mm]

Bearing width [mm]

Housing

Length [mm]

Width [mm]

Height [mm]

Shaft diameter [mm]

More values

Speed [min^-1]

Precision

System rigidity [N/μm]

Expected lifetime [h]

You can enter the values for your searched product here.
You have two possibilities:

From the GMN default value
Enter the individual value into the field provided

The standard values are dependent. Values which are not available for the entered combination are presented in the informational list in parentheses.

The available minimum or maximum standard values can be obtained by clicking on the symbols:

The index before the input fields quantifies the possible combinations.

Spindle ball bearings

With bore diameter d = 5 to 120 mm
GMN standard series 18 .., 19 .., 10 .., 02 .. (According to DIN 616 and ISO 15)

Deep groove ball bearing

With bore diameter d = 5 to 40 mm
GMN standard series 60 ../ 62 .. (as per DIN 616 and ISO 15)

Load

Radial [N]

Axial [N]

Temperature

Outer ring [°C]

Inner ring [°C]

Summary - Bearing systems (3/3)

Request - Standard bearing (1/2) Request - Bearing systems (2/3) Request - Special bearing (2/3)

Gas

Vacuum [mbar]

Fluid and humidity

Pressure [bar]

Free entry opportunity

Production

Units per year

Units per month

Units, one time

Target unit price [Euro]

Manufacturing delivery schedule

Prototype

Make a prototype?

Yes

No

Prototype delivery schedule

by email

by fax

by mail

* Company

The field is required.

* First name

The field is required.

* Last name

The field is required.

Department

The field is required.

Street

The field is required.

House number

The field is required.

Zip code

The field is required.

City

The field is required.

Country

The field is required.

Phone

The field is required.

Fax

The field is required.

* E-mail

The field is required.

I have read the Privacy Statement and state that I accept it.
Please click here to see the Privacy Statement.

You must accept the terms and conditions before sending your message.

* Input required.

Attachment